Inflatable promotional tent with printing
frame, printed canopy, 4 sand weights (without sand), bag, 4 pegs and ropes, hand pump.
3x3 m, 4x4 m, 5x5 m, 6x6 m
- without walls
- with 3 walls, single-sided print
- with 3 walls, double-sided print
- separate tent wall
The average production and courier delivery time is 3 weeks from approval of the 2D visual and receipt of payment.
Eye-catching advertising on a pneumatic tent with an inflatable frame.
The inflatable advertising tent is a professional presentation solution for exhibitions, festivals, sporting events, roadshows, markets and corporate events. It is available in sizes 3 × 3 m, 4 × 4 m, 5 × 5 m and 6 × 6 m.
The roof is fully printed by sublimation on the outside. The pneumatic frame is enclosed in a protective polyester cover available in eight colours.
Depending on the variant selected above, you will receive the tent without walls, with three single-sided printed walls, or with three double-sided printed walls. The final option is a separate single-sided printed wall that can be used to fully close the tent.
Sealed inflatable frame with pressure relief valves
The tent is inflated using the double-action hand pump included in the package. The pump delivers approximately 3 litres of air on the downward stroke and 1.7 litres on the upward stroke.
After inflation, the air system is sealed. The tent therefore does not require a continuously connected blower or an electrical connection during use. Pressure relief valves protect the frame from excessive pressure.
- The 3 × 3 m tent can be inflated in approximately 2 minutes.
- The 6 × 6 m tent can be inflated in approximately 10 minutes.
- The inner air frame is protected by an additional polyester cover.
- The protective frame cover is available in 8 colours.
Full-surface printing with no surcharge for the amount of colour
With sublimation, the ink penetrates directly into the polyester fibres under heat. The print cannot be felt to the touch, contains fade-retarding agents, and allows photographs, gradients, logos and fine details to be reproduced.
The roof is printed over the entire outer surface. With a single-sided wall, one side of the white 600D polyester is printed; the other side remains white and the design may show through in bright light. The design can be placed on the inside or outside of the wall according to your instructions.
Two printed fabrics with an opaque membrane
A double-sided printed wall is not made by printing both sides of a single fabric. Two separate white 600D polyester fabrics are printed, with a membrane inserted between them. All layers are then sewn together into one wall.
The result is two full advertising surfaces. The inside and outside can feature the same or different graphics, while the membrane reduces show-through from the design on the opposite side.
Contents of the basic package
- inflatable frame with sealed air system and pressure relief valves,
- protective polyester frame cover in the selected colour,
- roof with single-sided full-surface sublimation printing,
- double-action hand pump,
- 4 anchoring pegs and 4 guy ropes,
- black fillable ballast bags supplied without sand.
Once filled, one ballast bag weighs approximately 21 kg. Side walls are included only if the customer selects the corresponding variant.
Artwork is supplied by the customer
We do not create artwork. You can download a blank template from the page, but using it is not mandatory. After submitting and paying for the order, send the print-ready files or a link to cloud storage to the email address provided in the order confirmation.
1. Order
Choose the size and one of four variants.
2. Artwork
Send your finished artwork by email or via cloud storage.
3. Preview
Before production, approve the prepared 2D visualisation.
4. Production
The average production time is approximately 3 weeks.
By submitting the order, the customer confirms that they hold the rights to use the supplied artwork, logos, photographs, texts and trademarks. At the same time, they consent to their processing and printing to the extent necessary to manufacture the ordered product.
Always anchor the tent correctly
On soft ground, use anchoring pegs and guy ropes. On concrete, paving or another hard surface, fill the ballast bags with sand and secure them according to the instructions.
The tent is a temporary mobile structure. Do not use it in strong winds, storms or when the weather forecast is unfavourable.
Most frequently asked questions before ordering
Is an electric pump included in the package?
No. A double-action hand pump is included. No electrical connection is required either for inflation or during use.
Are three side walls always included in the price?
No. It depends on the variant selected in the configurator. You can buy the tent without walls, with three single-sided printed walls, or with three double-sided printed walls.
What is the separate wall for?
It is an optional single-sided printed wall used to close the remaining fourth side of the tent.
Can you create the graphic design for me from scratch?
No. The customer supplies their own finished artwork and must have the right to use it. Before production, a 2D visualisation is prepared to check the placement of the supplied artwork.
Is sand included with the ballast bags?
No. The bags are supplied empty. Once filled with sand, one bag weighs approximately 21 kg.
When does the production lead time begin?
Average production takes approximately three weeks after payment is received, usable artwork is supplied and the 2D visualisation is approved.
If you need a faster printed solution or are looking for a different size, see our printed pop-up advertising tents.
Inflatable advertising tent